行業資訊

水穩攪拌站會出現怎樣的故障？

來源：http://m.angelatarot.com/ 日期：2022-03-24

　　水穩攪拌站是一種應用建筑施工場地使用的大型設備，使用時間久了自然而然會出現一些故障，作為操作人員，就要找出是怎樣的故障原因，以免后期出現同樣的故障。
Water stability mixing station is a kind of large equipment used in construction sites. After a long time of use, some failures will naturally occur. As an operator, it is necessary to find out what the cause of the failure is, so as to avoid the same failure in the later stage.

　　在水穩攪拌站的建設和生產過程中，會出現故障。攪拌主機的無聊現象時有發生。此類故障多為攪拌主機內的攪拌槳攪拌故障，帶動攪拌主軸的鏜車，直至停止轉動。
In the construction and production process of water stable mixing plant, there will be failures. The boring phenomenon of stirring engine often occurs. This kind of failure is mostly the stirring paddle in the stirring host stirring failure, driving the boring machine of the stirring spindle, until it stops rotating.

　　出現這種故障的原因可能是：生產過程中，攪拌負荷大，物料箍住攪拌槳。人為失誤造成的二次投料問題。稱量不準確，攪拌葉片或側葉片與罐內壁間隙大，造成其他異物進入，堵塞攪拌槳；水穩攪拌站攪拌主機電壓過低，降低功率。
The reason for this failure may be: during the production process, the stirring load is large and the material is clamped on the stirring paddle. Secondary feeding problems caused by human error. The weighing is not accurate, and the gap between the mixing blade or side blade and the inner wall of the tank is large, resulting in other foreign bodies entering and blocking the mixing blade; Water stable mixing station mixing host voltage is too low, reduce the power.

　　以上便是問題的講解內容，當然要避免這類故障的發生就要在日常生活中多對設備進行維護，那么想了解更多內容就來http://m.angelatarot.com網站咨詢吧。

上一條：推不推薦濟南攤鋪機出租這件事兒呢？

下一條：路面機械設備的保養方法有什么？